Претраживање
Приказ резултата 11-20 од 53
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Synthesis and properties of bis(pyrrolidino)fullerenes bridged by a flexible alkyl-tether
(Oxford : Pergamon-Elsevier Science Ltd, 2015)
The one-pot bistycloaddition of alkyl-tethered diglycines to C-60 provided five series of bridged bis(pyrrolidino)fullerenes with good regioselectivity, giving mainly cis-2 and cis-3 products. An influence of the bridge ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...
Corrosion stability of Zn-Co alloys deposited from baths with high and low Co content - The influence of deposition current density
(Elsevier, 2010)
Electrochemically deposited Zn-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy (AAS) for determination of chemical composition, anodic linear sweep voltammetry (ALSV) ...
Influence of the Shape of Copper Powder Particles on the Crystal Structure and Some Decisive Characteristics of the Metal Powders
(MDPI, 2019)
Three different forms of Cu powder particles obtained by either galvanostatic electrolysis or a non-electrolytic method were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and particle size ...
The effect of deposition temperature on the surface coverage and morphology of iron-phosphate coatings on low carbon steel
(Elsevier, 2011)
The influence of deposition temperature and concentration of NaNO(2) in the phosphating bath on the surface morphology and coverage of iron-phosphate coatings on low carbon steel was investigated. The phosphate coatings ...
Influence of microstructure and roughness level on corrosion resistance of the austenitic stainless steel welded joint
(Wiley, 2021)
The influence of microstructure and surface roughness of the X5CrNi18-10 austenitic stainless steel-welded joint on resistance to uniform, pitting, and intergranular corrosion, as well as on the stability of the passive ...
Structural investigation of mechanically activated ZnO powder
(Elsevier, 2015)
Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders ...
Influence of sintering time on density properties and SEM analysis of cordierite-based ceramics / Uticaj vremena sinterovanja na gustinu i SEM analiza kordijeritne keramike
(Beograd : Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS, 2021)
The mechanical activation of the starting mixtures of cordierite (2MgO*2Al2O3*5SiO2) with 5.00 mass % TiO2 was performed in a high energy ball mill during 10-80 min. The applied compaction pressure before the sintering ...
Structural characterization and electrical properties of sintered magnesium-titanate ceramics
(Elsevier, 2013)
In this article the influence of ball miling process on structure of MgO-TiO2 system, as well as the electrical properties of samples after sintering, was investigated. The mixtures of MgO-TiO2 powders were mechanically ...