Приказ основних података о документу

Katalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha

dc.creatorTomić, Milorad V.
dc.creatorMićić, Vladan
dc.creatorPavlović, Miomir
dc.creatorPavlović, Miroslav M.
dc.creatorBošković, Goran
dc.creatorNikolić, Nebojša D.
dc.date.accessioned2019-01-30T17:44:49Z
dc.date.available2019-01-30T17:44:49Z
dc.date.issued2015
dc.identifier.issn0351-9465
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/1685
dc.description.abstractThe subject of the research is influence of sulfuric acid on morphology of electrochemically obtained copper powder during galvanostatic electrolysis mode. In this paper electrodeposition of copper powder from sulphate electrolyte was carried out. Electrolytes with three different concentrations of Cu2+ (7 g/dm3, 18 g/dm3 and 33 g/dm3) were used, each in combination with three different concentrations of H2SO4 (100 g/dm3, 150 g/dm3 and 200 g/dm3), so that copper powder was deposited from nine electrolytes. Copper wire with surface area of 1cm2 was used as cathode, and copper anode in the form of metal sheet was pressed against the wall of electrochemical cell that had volume of 500 cm³. Experiments were carried out at room temperature, and electrolyte stirring was performed using a magnetic stirrer. Copper powder was deposited galvanostatically at current densities of j = 1500 A/m2, j=2000 A/m2 and j=2500 A/m2. Produced copper powder was removed from cathode every three minutes. All the characteristics of powder depend on the size and shape (morphology) of particles and they are mutually correlated. Research of morphology and size of particle was carried out using scanning electron microscopy (SEM). Increase of H2SO4 concentration causes increase in branching of copper powder. It was concluded that the size of copper powder grains reduces with the increase in concentration of H2SO4.en
dc.description.abstractPredmet istraživanja je uticaj sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog praha pri galvanostatskom režimu elektrolize. U ovom radu je vršeno elektrohemijsko taloženje bakarnog praha iz sulfatnih elektrolita. Korišćeni su elektroliti sa tri koncentracije Cu2+ (7 g/dm3, 18 g/dm3 i 33 g/dm3) i svaka u kombinaciji sa tri koncentracije H2SO4 (100 g/dm3, 150 g/dm3 i 200 g/dm3), tako da je bakarni prah taložen iz devet elektrolita. Kao katoda je korišćena bakarna žica površine 1cm2, a bakarna anoda u obliku lima je bila priljubljena uz zid elektrohemijske ćelije, zapremine 500 cm³. Eksperimenti su izvođeni na sobnoj temperaturi, a mešanje elektrolita vršeno je pomoću magnetne mešalice. Bakarni prah taložen je galvanostatski pri gustinama struje od: j=1500 A/m2, j=2000 A/m2 i j=2500 A/m2. Proizvedeni bakarni prah je uklanjan sa katode svaka tri minuta. Sve osobine praha zavise od oblika i dimenzija čestica (morfologije) i međusobno su povezane. Ispitivanje morfologije i veličine čestica vršeno je pomoću skenirajuće elektronske mikroskopije (SEM). Sa povećanjem koncentracije H2SO4, povećava se i razgranatost bakarnog praha. Utvrđeno je da se veličina čestica smanjuje sa povećanjem koncentracije H2SO4.sr
dc.publisherBelgrade, Serbia : Engineering Society for Corrosion
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceZaštita materijala
dc.subjectelectrodepositionen
dc.subjectcopper powderen
dc.subjectmorphologyen
dc.subjectcatalysisen
dc.subjectelektrohemijsko taloženjesr
dc.subjectprah bakrasr
dc.subjectmorfologijasr
dc.subjectkatalizasr
dc.titleCatalytic activity of sulfuric acid on the morphology of electrochemically obtained copper powderen
dc.titleKatalitičko delovanje sumporne kiseline na morfologiju elektrohemijski dobijenog bakarnog prahasr
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractБошковић, Горан; Томић, Милорад В.; Павловић, Миомир; Николић, Небојша; Мићић, Владан; Павловић, Мирослав М.; Каталитичко деловање сумпорне киселине на морфологију електрохемијски добијеног бакарног праха; Каталитичко деловање сумпорне киселине на морфологију електрохемијски добијеног бакарног праха;
dc.citation.volume56
dc.citation.issue4
dc.citation.spage496
dc.citation.epage504
dc.citation.other56(4): 496-504
dc.citation.rankM24
dc.identifier.doi10.5937/ZasMat1504496t
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/8133/1683.pdf
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу