Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays
Samo za registrovane korisnike
2013
Autori
Jakšić, ZoranSarajlić, Milija
Lazić, Žarko
Dalarsson, Mariana
Dalarsson, Nils
Randjelović, Danijela
Radulović, Katarina
Tanasković, Dragan
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
This paper presents the design and microfabrication of a two-dimensional metal-dielectric metamaterial structure based on an array of pillars with submicrometer diameters and heights. The diameters of pillars periodically vary along one axis in a sawtooth fashion and are constant along the other. The electromagnetic field distribution within this graded metamaterial was considered utilizing an accurate analytical approach. The pillar arrays were fabricated in photoresist and subsequently covered with a sputter-deposited aluminum film Structures were defined by direct laser writing in photoresist film Controlled overexposure has been applied in order to make pillar features smaller than the nominal resolution of the equipment. The structures were characterized by optical and atomic force microscopy and by angle-dependent Fourier Transform infrared spectroscopy. The produced graded frequency-selective surfaces may be used e.g. in sensing.
Ključne reči:
Metamaterials / Metal-Dielectrics / Frequency Selective / Surfaces / MicrofabricationIzvor:
11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting, 2013, 21-24Finansiranje / projekti:
Institucija/grupa
IHTMTY - CONF AU - Jakšić, Zoran AU - Sarajlić, Milija AU - Lazić, Žarko AU - Dalarsson, Mariana AU - Dalarsson, Nils AU - Randjelović, Danijela AU - Radulović, Katarina AU - Tanasković, Dragan PY - 2013 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1375 AB - This paper presents the design and microfabrication of a two-dimensional metal-dielectric metamaterial structure based on an array of pillars with submicrometer diameters and heights. The diameters of pillars periodically vary along one axis in a sawtooth fashion and are constant along the other. The electromagnetic field distribution within this graded metamaterial was considered utilizing an accurate analytical approach. The pillar arrays were fabricated in photoresist and subsequently covered with a sputter-deposited aluminum film Structures were defined by direct laser writing in photoresist film Controlled overexposure has been applied in order to make pillar features smaller than the nominal resolution of the equipment. The structures were characterized by optical and atomic force microscopy and by angle-dependent Fourier Transform infrared spectroscopy. The produced graded frequency-selective surfaces may be used e.g. in sensing. C3 - 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting T1 - Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays SP - 21 EP - 24 DO - 10.1109/TELSKS.2013.6704885 ER -
@conference{ author = "Jakšić, Zoran and Sarajlić, Milija and Lazić, Žarko and Dalarsson, Mariana and Dalarsson, Nils and Randjelović, Danijela and Radulović, Katarina and Tanasković, Dragan", year = "2013", abstract = "This paper presents the design and microfabrication of a two-dimensional metal-dielectric metamaterial structure based on an array of pillars with submicrometer diameters and heights. The diameters of pillars periodically vary along one axis in a sawtooth fashion and are constant along the other. The electromagnetic field distribution within this graded metamaterial was considered utilizing an accurate analytical approach. The pillar arrays were fabricated in photoresist and subsequently covered with a sputter-deposited aluminum film Structures were defined by direct laser writing in photoresist film Controlled overexposure has been applied in order to make pillar features smaller than the nominal resolution of the equipment. The structures were characterized by optical and atomic force microscopy and by angle-dependent Fourier Transform infrared spectroscopy. The produced graded frequency-selective surfaces may be used e.g. in sensing.", journal = "11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting", title = "Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays", pages = "21-24", doi = "10.1109/TELSKS.2013.6704885" }
Jakšić, Z., Sarajlić, M., Lazić, Ž., Dalarsson, M., Dalarsson, N., Randjelović, D., Radulović, K.,& Tanasković, D.. (2013). Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays. in 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting, 21-24. https://doi.org/10.1109/TELSKS.2013.6704885
Jakšić Z, Sarajlić M, Lazić Ž, Dalarsson M, Dalarsson N, Randjelović D, Radulović K, Tanasković D. Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays. in 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting. 2013;:21-24. doi:10.1109/TELSKS.2013.6704885 .
Jakšić, Zoran, Sarajlić, Milija, Lazić, Žarko, Dalarsson, Mariana, Dalarsson, Nils, Randjelović, Danijela, Radulović, Katarina, Tanasković, Dragan, "Gradient-Index Infrared Metamaterials Based on Metal-Dielectric Submicrometer Pillar Arrays" in 11th International Conference on Telecommunications in Modern Satellite, Cable and Broadcasting (2013):21-24, https://doi.org/10.1109/TELSKS.2013.6704885 . .