Приказ основних података о документу

Određivanje pokrivenosti površine čelika gvožđe-fosfatnim prevlakama anodnim rastvaranjem primenom linearne voltametrije

dc.creatorPopić, Jovan P.
dc.creatorJegdić, Bore
dc.creatorBajat, Jelena
dc.creatorMitrić, Miodrag
dc.creatorMišković-Stanković, Vesna
dc.date.accessioned2019-01-30T17:36:57Z
dc.date.available2019-01-30T17:36:57Z
dc.date.issued2013
dc.identifier.issn0352-5139
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/1310
dc.description.abstractIn this study, the effect of deposition time and concentration of NaNO2 in the phosphate bath on the surface morphology of iron-phosphate coatings on low carbon steel was investigated using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The composition of ironphosphate coatings was determined using energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), while surface coverage was evaluated by the voltammetric anodic dissolution (VAD) technique in the borate solution. The addition of NaNO2 to the phosphate bath significantly increased the surface coverage since better packed crystals of smaller size, which favour the phosphate nucleation, were obtained. It was also shown that prolonged deposition time increased the surface coverage, coating roughness and crystal size in the lateral direction, altering also the crystal shape from large platelets non-uniformly distributed on the steel surface during the initial time to better packed laminated and needle-like structures during prolonged exposure.en
dc.description.abstractU ovom radu je, primenom skenirajuće elektronske mikroskopije (SEM) i mikro- skopije međuatomskih sila (AFM), ispitivan uticaj vremena taloženja i koncentracije NaNO2 u rastvoru za fosfatiranje na morfologiju gvožđe-fosfatnih prevlaka na nisko-ugljeničnom čeliku. Sastav gvožđe–fosfatnih prevlaka je određen primenom energetske disperzione atomske analize (EDS) i difrakcijom H-zraka (XRD), dok je pokrivenost površine određivana anodnim rastvaranjem u boratnom rastvoru primenom linearne voltametrije (VAD). Pokazano je da dodatak NaNO2 u rastvoru za fosfatiranje značajno povećava pokrivenost površine čelika, jer se formiraju bolje pakovani kristali, manje veličine. Duže vreme taloženja takođe povećava pokrivenost površine, kao i hrapavost prevlake i širinu kristala. Oblik kristala se tokom dužeg vremena taloženja menja od kristala u obliku većih ploča neuniformno raspoređenih na površini čelika, ka bolje pakovanim laminarnim i igličastim kristalima.sr
dc.publisherSerbian Chemical Society
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45019/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceJournal of the Serbian Chemical Society
dc.subjectlow carbon steelen
dc.subjectiron-phosphate coatingsen
dc.subjectsurface coverageen
dc.subjectVADen
dc.subjectAFMen
dc.titleDetermination of surface coverage of iron-phosphate coatings on steel using the voltammetric anodic dissolution techniqueen
dc.titleOdređivanje pokrivenosti površine čelika gvožđe-fosfatnim prevlakama anodnim rastvaranjem primenom linearne voltametrijesr
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractБајат, Јелена Б.; Попић, Јован П.; Јегдић, Боре; Мисковиц-Станковиц, Весна Б.; Митрић, Миодраг; Одређивање покривености површине челика гвожђе-фосфатним превлакама анодним растварањем применом линеарне волтаметрије; Одређивање покривености површине челика гвожђе-фосфатним превлакама анодним растварањем применом линеарне волтаметрије;
dc.citation.volume78
dc.citation.issue1
dc.citation.spage101
dc.citation.epage114
dc.citation.other78(1): 101-114
dc.citation.rankM23
dc.identifier.doi10.2298/JSC120706096P
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/7814/1308.pdf
dc.identifier.scopus2-s2.0-84874619390
dc.identifier.wos000314484100010
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу