Search
Now showing items 1-10 of 38
Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
(Wiley, 2016)
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC ...
Sage Extracts as Inhibitors of Steel Corrosion in 4% HCl
(Esg, Belgrade, 2016)
In this paper the research of corrosion protection of steel by processing corrosion environment using various concentrations of sage extracts (Salvia officinalis) (0.5 g/dm(3), 1 g/dm(3) and 1.5 g/dm(3)) in a 4% solution ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Economizer water-wall damages initiated by feedwater impurities
(Association of Chemical Engineers of Serbia, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine: XIX YuCorr Međunarodna konferencija - knjiga radova / Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection: XIX YuCorr International Conference - proceedings; [September 12-15, 2017, Tara Mountain, Serbia]
(Beograd: Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)Belgrade: Serbian Society of Corrosion and Materials Protection (UISKOZAM), 2017)
Chemical corrosion of metals and alloys / Hemijska korozija metala i legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2016)
In this paper, phenomena of chemical corrosion of metals and alloys in electrolyte solutions are analyzed. It is shown that iron, chromium and other metals and alloys dissolve much faster than is the corrosion rate determined ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-V C H Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Ternary Zn-Ni-Co alloy: anomalous codeposition and corrosion stability
(Serbian Chemical Society, 2015)
Electrochemically deposited Zn-Ni-Co alloys under various deposition conditions were investigated using atomic absorption spectroscopy for the determination of the chemical composition, atomic force microscopy for surface ...
Microstructure and corrosion behaviour of Zn-Co alloys deposited from three different plating baths / Mikrostruktura i koroziono ponašanje Zn-Co legura taloženih iz sulfatnog i hloridnih rastvora
(Serbian Chemical Society, 2011)
The effects of plating baths of different composition on the micro- structure and corrosion stability of Zn-Co alloy coatings were studied. Zn-Co alloys with the same Co content were deposited from chloride plating baths ...
Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
(Journal of Cultural Heritage, 2017)
The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very ...