Претраживање
Приказ резултата 1-10 од 12
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures
(Elsevier, 2018)
Silver dendritic nanonstructures obtained by the potentiostatic electrolysis from different electrolytes at different overpotentials were characterized by the scanning electron microscopy (SEM) technique and X-ray diffraction ...
Influence of the Shape of Copper Powder Particles on the Crystal Structure and Some Decisive Characteristics of the Metal Powders
(MDPI, 2019)
Three different forms of Cu powder particles obtained by either galvanostatic electrolysis or a non-electrolytic method were analyzed by a scanning electron microscope (SEM), X-ray diffraction (XRD) and particle size ...
Carbon-supported hydrous ruthenium oxide composite as electrochemical supercapacitors - 1. Preparation, Morphology and Characterization of the Composites / Kompozitni materijal hidratisani rutenijum oksid / ugljenik kao elektrohemijski superkondenzator 1. dobijanje, morfologija i karakterizacija kompozita
(Association of Chemical Engineers of Serbia, 2007)
Preparation of hydrous ruthenium oxide/carbon black nanocomposite material was performed by the impregnation method starting from hydrous RuO2 sol as a precursor. Black Pearls 2000 (R) (BP) and Vulcan (R) XC-72 R (XC) was ...
Implementation of the Chicot–Lesage Composite Hardness Model in a Determination of Absolute Hardness of Copper Coatings Obtained by the Electrodeposition Processes
(MDPI, 2021)
The influence of various electrolysis parameters, such as the type of cathode, composition of the electrolyte and electrolysis time, on the morphology, structure and hardness of copper coatings has been investigated. ...
Structural investigation of mechanically activated ZnO powder
(Elsevier, 2015)
Commercially available ZnO powder was mechanically activated in a planetary ball mill. In order to investigate the specific surface area, pore volume and microstructure of non-activated and mechanically activated ZnO powders ...
Evolution of microstructure of melt-spun Nd-Fe-B alloy with low Nd content during the heat treatment
(Metalurgija, 2004)
In order to examine and study evolution of microstructure during the phase transformations for applied heat treatment regime for achieving the optimal values of magnetic properties of the investigated melt-spun Nd-Fe-B ...
The influence of strontium content and sintering temperature on monazite stability
(Association for ETRAN Society, 2024)
This paper shows a simple way to synthesize a series of Ce1-xSrxPO4 ceramic materials using acetate solutions of Ce and Sr instead of nitrate which were used so far. For synthesis, the preparation method was used by simple ...
Correlation between crystal orientation and morphology of electrolytically produced powder particles: Analysis of the limiting cases / Korelacija izmedju orijentacije kristala i morfologije elektrolitički proizvedenih praškastih čestica - analiza graničnih slučajeva
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Lead and nickel powder particles were produced by the processes of electrolysis and characterized by scanning electron microscope (SEM). The X-ray diffraction (XRD) analysis of the produced particles was done. Morphologies ...
A possible mechanism of formation of flower-like MgO/Mg(OH)2 structures by galvanostatic molten salt electrolysis: The concept of local diffusion fields
(Elsevier, 2019)
The processes of electrodeposition from magnesium nitrate hexahydrate melt by galvanostatic regime of electrolysis
have been analyzed. The structure of the formed particles was examined by X-ray diffraction (XRD),
which ...