Pretraživanje
Prikaz rezultata 1-10 od 30
Effect of the electrolysis regime on the structural characteristics of honeycomb-like electrodes
(Soc Chemists Technologists Madeconia, Skopje, 2013)
The effect of different current regimes of electrolysis on the micro- and nanostructural characteristics of open porous structures was examined by the analysis of honeycomb-like copper electrodes obtained by constant ...
Investigation of the morphology and surface properties of crosslinked poly(urethane-ester-siloxane)s / Ispitivanje morfologije i površinskih svojstava umreženih poli(uretan-estar-siloksana)
(Association of Chemical Engineers of Serbia, 2012)
Two series of crosslinked poly(urethane-ester-siloxane)s were synthesized from α,ω-dihydroxy-(ethylene oxide-poly(dimethylsiloxane)-ethylene oxide) (EO-PDMS- -EO), 4,4'-methylenediphenyl diisocyanate and Boltorn® hyperbranched ...
Influence of the exchange current density and overpotential for hydrogen evolution reaction on the shape of electrolytically produced disperse forms
(International Association of Physical Chemists, 2020)
In this study, comprehensive survey of formation of disperse forms by the electrolysis from aqueous electrolytes and molten salt electrolysis has been presented. The shape of electrolitically formed disperse forms primarily ...
The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition / Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
(Serbian Chemical Society, 2008)
The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 ...
Electrolysis conditions for obtaining cupric oxide (CUO) / Uslovi dobijanja bakar (II) oksida elektrolitičkim putem
(Belgrade, Serbia : Engineering Society for Corrosion, 2009)
Conditions for obtaining copper powder with different regimes of electrolysis [potentiostatic, galvanostatic and programmed current-voltage regimes ( periodically changing rate)] and effects on it's morphology and ...
Electrical Conductivity of Lignocellulose Composites Loaded with Electrodeposited Copper Powders. Part III. Influence of Particle Morphology on Appearance of Electrical Conductive Layers
(Esg, Belgrade, 2012)
The electrical conductivity of the system based on lignocellulose (LC) biopolymer matrix filled with electrodeposited copper powder has been studied. Galvanostatically produced copper powder, having highly porous, highly ...
Morphology and Structure of Electrolytically Synthesized Tin Dendritic Nanostructures
(MDPI, 2022)
The formation of tin dendritic nanostructures by electrolysis from the alkaline electrolyte
has been investigated. Morphology and structure of Sn dendrites produced applying both potentiostatic and galvanostatic regimes ...
The use of salicylaldehyde derivatives as a nitrogen source for antibiotic production by Streptomyces hygroscopicus CH-7
(Association of Chemical Engineers of Serbia, 2017)
In the present work, four derivatives of salicylaldehyde (salicylaldehyde-hydrazone, phenylhydrazone, semicarbazone and thiosemicarbazone) were synthesized using both conventional (95% ethanol) and green (crude glycerol ...
Supercapacitors based on graphene/pseudocapacitive materials
(Serbian Chemical Society, 2017)
Composites of graphene and SnO2 were successfully prepared by a single step simultaneous synthesis of SnO2 and reduction of graphene oxide (GO). Three different compositions of precursor solution resulted in different ...
The shape of the polarization curve and diagnostic criteria for control of the metal electrodeposition process
(Serbian Chemical Society, 2016)
The simulated shapes of the polarization curves were correlated with the type of metal electrodeposition process control as a function of the ratio of the exchange current density to the limiting diffusion current density ...