Претраживање
Приказ резултата 31-40 од 81
Analysis and interpretation of bimetallic plasmonic metamaterial properties for forensic applications
(Belgrade : University of Criminal Investigation and Police Studies, 2023)
Plasmonic biochemical sensors, as a subgroup of optical refractometric sensors, are a topic of rapid research and development due to their ability to detect trace amounts of biochemical agents, ...
Electrodeposition of cobalt powders with novel three-dimensional structure
(Metalurgija, 2011)
Novel three-dimensional cobalt powder structures were successfully prepared by electrodeposition. Electrodeposited cobalt powder was characterized by scanning electron microscopy (SEM) and light microscopy. It was possible ...
Optimization of electrodeposition parameters to improve composite hardness of nickel coatings on brass substrate for varying film thicknesses and applied indentation loads
(Belgrade : ETRAN Society, 2022)
In this investigation, nickel coatings were electrodeposited on brass substrate. The effects of
electrodeposition process parameters such as, current density and deposition time (coatings thickness), on surface morphology ...
Morphology, structure and hardness of electrolytically produced copper coatings
(2022)
Poster presented at: 4th International Congress of Chemists and Chemical Engineers of Bosnia and Herzegovina, June, 30th-July, 02nd, Sarajevo, Bosnia and Herzegovina
Morphological and Structural Characterization of Tin Dendritic Nanostructures Produced by Various Electrodeposition Processes
(Belgrade : Serbian Academy of Sciences and ArtsBelgrade : Faculty of Technology and Metallurgy, University of Belgrade, 2022)
In this study, Sn powders were electrodeposited from an alkaline electrolyte containing 20 g/l SnCl2 × 2H2O in 250 g/l NaOH at the room temperature by application of both potentiostatic and
galvanostatic regimes of the ...
Identification of intermetallic compounds in electrodeposited copper-cadmium alloys by electrochemical techniques
(Elsevier, 1989)
Anodic sweep voltammetry was used to identify different intermetallic compounds and assess their amount in copper-cadmium alloys. Four compounds are found in thin (1–8 μm) electroplated alloy films: CuCd3, Cu5Cd8, Cu4Cd3 ...
Phase-structure analysis of brass by anodic linear-sweep voltammetry
(Springer, 1992)
Anodic linear-sweep voltammetry (ALSV) was applied to electrodeposited alloy layers and to metallurgically obtained Cu−Zn alloys of different composition and structure. Metallurgically obtained samples covered the range ...
Mechanical Properties of Electrolytically Produced Copper Coatings Reinforced with Pigment Particles
(MDPI, 2023)
Copper from sulfate baths without and with added inorganic pigment particles based on strontium aluminate doped with europium and dysprosium (SrAl2O4: Eu2+, Dy3+) was electrodeposited on a brass cathode by a galvanostatic ...
Impact of deposition conditions on the electrocatalytic performances of Sn-Pd catalysts in ethanol oxidation reaction
(Serbian society of corrosion and materials protection (UISKOZAM) / Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2023)
We are reporting the electrochemical behavior of bimetallic Sn-Pd catalysts in ethanol oxidation reaction (EOR). Sn-Pd catalysts were prepared by two step electrodeposition technique whereby by regulating deposition ...
Phenomena of Nucleation and Growth of Tin Dendrites from the Alkaline Solution
(Serbian society of corrosion and materials protection (UISKOZAM) / Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2023)
The processes of nucleation and growth of tin dendrites from the alkaline hydroxide solution have been investigated. Nucleation of tin was examined by chronoamperometry at the cathodic potentials which belonged to various ...