Претраживање
Приказ резултата 1-10 од 40
Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
(Wiley, 2016)
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC ...
Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
(Wiley, 2016)
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC ...
Sage Extracts as Inhibitors of Steel Corrosion in 4% HCl
(Esg, Belgrade, 2016)
In this paper the research of corrosion protection of steel by processing corrosion environment using various concentrations of sage extracts (Salvia officinalis) (0.5 g/dm(3), 1 g/dm(3) and 1.5 g/dm(3)) in a 4% solution ...
Stecište nauke i prakse u oblastima korozije, zaštite materijala i životne sredine: XIX YuCorr Međunarodna konferencija - knjiga radova / Meeting Point of the Science and Practice in the Fields of Corrosion, Materials and Environmental Protection: XIX YuCorr International Conference - proceedings; [September 12-15, 2017, Tara Mountain, Serbia]
(Beograd: Udruženje inženjera Srbije za koroziju i zaštitu materijala (UISKOZAM)Belgrade: Serbian Society of Corrosion and Materials Protection (UISKOZAM), 2017)
Economizer water-wall damages initiated by feedwater impurities
(Association of Chemical Engineers of Serbia, 2014)
The main causes of efficiency loss in thermal power plants are boiler tube failures that diminish unit reliability and availability, and raise the cost of the electric energy. For that reason, the regular examination of ...
Laser cleaning of the archaeological metal sample from the Danube / Istraživanje mogućnosti primene lasera u čišćenju arheoloških metalnih predmeta
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The paper presents the results of laser cleaning of corrosive and other deposits on a metal archaeological artefact from the Danube. Nd: YAG laser, energy up to 750 mJ and wavelengths λ = 1064 nm and 532 nm is used. The ...
Corrosion stability of cerium-doped cataphoretic epoxy coatings on AA6060 alloy
(Wiley-V C H Verlag Gmbh, Weinheim, 2016)
In this study, corrosion protection efficiency of undoped epoxy and epoxy coating doped with cerium on aluminum alloy AA6060 is evaluated over prolonged exposure to 3wt% NaCl solution by electrochemical impedance spectroscopy ...
Reationship between corrosion potential and diferent corrosion forms of metals, alloys and theirs welded joints: Part I / Veza izmenu korozionog potencijala i različitih vidova korozije metala, legura i njihovih zavarenih spojeva - deo I
(DUZS - Društvo za unapređivanje zavarivanja u Srbiji, Beograd, 2017)
This paper briefly describes the relationship between corrosion potential and different corrosion forms of metals and their welded joints. The nature of corrosion potential and the method of its measurement is also described. ...
Corrosion testing of sa 387 gr. 91 steel
(Society for Structural Integrity and Life, Institute for Material Testing, 2017)
Corrosion behaviour of steel Sa 387 Gr. 91 is tested in solutions containing chloride and sulphate anions. These solutions simulate the conditions of marine and industrial atmosphere. The tests are carried out in a slightly ...
Determination of the weld metal corrosion rate using electrochemical techniques / Određivanje brzine korozije metala šava u zavarenom spoju pomoću elektrohemijskih tehnika
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
To determine corrosion rate of the base metal and weld metal were applied electrochemical techniques: linear polarization resistance, linear sweep voltammetry and electrochemical impedance spectroscopy. The samples were ...