Претраживање
Приказ резултата 1-10 од 1155
Numerical analysis of aerodynamic performance of offshore wind turbine
(Belgrade, Serbia : Serbian Society of Mechanics, 2019)
The increasing size of wind turbine blades leads to various flow phenomena which are
influenced by aerodynamic design of blade. Detailed information of flow separation and wake
development are important for wind turbine ...
Modeling of the Conductivity Alteration in the Gold Thin Film-Based Mercury Sensor Using the Fuchs Theory
(Institute of Electrical and Electronics Engineers Inc., 2012)
We report on the development and testing of the metallic mercury sensor. Sensor is based on the gold thin film layer where sensing is achieved by formation of the gold-mercury amalgam. Complete technological procedure and ...
Evaluation of periodic processes with two modulated inputs based on nonlinear frequency response analysis
(2011)
One way to achieve process intensification is to operate the process in a periodic way, in order to obtain better average performance compared to the optimal steady-state operation. The source of the possible improvement ...
Sinteza, karakterizacija in uporaba Al-SBA-15 katalizatorja
(Ljubljana, Slovenija : Slovensko kemijsko društvo, 2019)
Naraščajoče povpraševanje po varnih industrijskih procesih je pripeljalo do razvoja in uporabe okolju prijaznih trdnih katalizatorjev, namenjenih za uporabo pri kislinsko kataliziranih reakcijah z dodano vrednostjo. Kislinska ...
Field effect transistor based on protons as charge carriers
(Elsevier, 2010)
We demonstrated a field effect transistor based on the modulation of the proton flow in confined water-containing nanochannels. The device resembles an MOSFET transistor with the difference that the charge carriers here ...
Controling the robotic arm using human machine interface and plc modicon m340
(University of Niš, Faculty of Electronic Engineering, 2015)
Remote cotrol management has enabled engineers to easily and quickly operate the facility management directly from their work place, making it possible to connect production facilities in large systems (which are localized ...
Thermo-mechanical properties of rigid polyurethane foams with cement addition
(Society of Chemists and Technologists of Macedonia, 2016)
The parameters of foam preparation, such as addition of fillers, have a significant effect on the properties of polyurethane foams. The goal of this work was to study the effect of the cement addition on the thermo-mechanical ...
Methods for Removal of Phenol from Wastewater / Metode uklanjanja fenola iz otpadne vode
(University of Kragujevac, Faculty of Agronomy, Čačak, 2017)
Phenol is a major pollutant in the wastewater because of its presence in the effluent of major processing and refining plants. It has severe effect on human being, both short term and long term. Various methods are used ...
Micromachining by maskless wet anisotropic etching {hkl} structures on {100} oriented silicon
(27th International Conference on Microelectronics, MIEL 2010 - Proceedings, 2010)
The paper presents investigation of micromechanical technique using 3D anisotropically etched Si structures. Ridge-like structure oriented along LT 110> direction is first etched with mask following maskless etching in ...
Fermentation of lignocellulosic renewable resources and hydrogen production
(The Academy of Sciences and Arts of the Republic of Srpska, 2016)
Using cheap renewable raw materials such as lignocellulosic feedstock for hydrogen production by fermentation has great significance and potential to give a major contribution to future clean energy. Using hydrogen as a ...