Претраживање
Приказ резултата 11-20 од 54
Elimination of Nucleation Exclusion Zones by Electrodeposition at a Reversing Current / Eliminacija zona isključenja nukleacije taloženjem reversnom strujom
(Belgrade : Serbian Chemical Society, 1998)
Elimination of nucleation exclusion zones by electrodeposition at a reversing current (RC) in the seconds time range is considered. It is shown that nucleation exclusion zones formed in constant regimes can be eliminated ...
Examination of the kinetics of Zr1.02Ni0.98 alloy hydriding / Ispitivanje reakcije hidriranja legure Zr1.02Ni0.98
(Belgrade : Serbian Chemical Society, 1999)
The hydriding kinetics of Zr1.02Ni0.98 alloy was examined in dependence on the number of hydriding/dehydriding cycles. The rate constants relating to three subsequent hydriding procedures of an alloy sample, at five ...
The Determination of the Optimum Current Wave in Reversing Current Metal Electrodeposition / Određivanje optimalnog odnosa talasa reversne struje pri elektrohemijskom taloženju metala
(Belgrade : Serbian Chemical Society, 1998)
The experimental procedure for the determination of the optimum reversing current wave, producing uniformlly distributed polycrystalline deposits, is given. First, deposition at the maximum current density for different ...
Nanoscale pattern formation during electrodeposition: Ru on reconstructed au(111)
(USA : American Physical Society, 1999)
Scanning tunneling microscopy results on Ru electrodeposition on reconstructed Au(111) are presented, which show a novel type of site-selective nucleation on this surface. At potentials around 0.0 V vs the Ag/AgCl reference ...
The role of surface defects in HOPG on the electrochemical and physical deposition of Ag / Uloga površinskih defekata na HOPG-u u elektrohemijskoj I fizičkoj depoziciji Ag
(Belgrade : Serbian Chemical Society, 1999)
The role of defects on a substrate surface during the initial stages of nucleation and growth of Ag deposited electrochemically and physically on highly oriented pyrolytic graphite (HOPG) has been observed ex situ by ...
Real surface area of the aluminium electrode in sodium chloride solution / Stvarna površina eletrode od aluminijuma u rastvoru natrijum-hlorida
(Belgrade : Serbian Chemical Society, 1999)
By combining the techniques of electrochemical slow potentiodynamic, AC impedance and atomic force microscopy (AFM), it was shown that the differences in the anodic dissolution rates of Al in 0.5 NaCl solutions as measured ...
The influence of protective atmosphere on oxidation of sintered SmCo5 magnetic materials
(ETRAN Society, 1996)
Understanding of the thermal stability of intermetallic SmCo5 powder is essential for designing the working atmosphere in all phases of the technological procedure in the production of sintered SmCo5 magnets to obtain ...
The influence of milling conditions on the properties of powder of intermetallic compound SmCo5 / Uticaj uslova mlevenja na svojstva intermetalnog jedinjenja SmCo5
(Kiev, Ukraine : Nauka dumka, 1996)
The dependence of magnetic properties of sintered magnetic materials, demands the quantification of the milling conditions. In this paper the part of the results of the investigation of the phase of milling of SmCo5 powder ...
Modeling of drawing thin glass sheet from a preform / Model izvlačenja tankih staklenih traka iz predoblika
(Serbian Chemical Society, 1998)
A one-dimensional model of thin glass sheet drawing has been developed. This model includes momentum, heat and mass balance equations. The density, viscosity and specific heat of the glass were calculated as functions of ...
Organic geochemical study of the "W" oil-gas field in the Yugoslav part of the Pannonian basin
(Organic Geochemistry, 1990)
The naphthenic crude oil from the "W" oil-gas field differs from almost all other, paraffinic base oils discovered until now in the Yugoslav part of the Pannonian basin. In order to explain this difference, some geological ...